森 大祐 
Daisuke MORI


役職 准教授
学位 博士(工学)
TEL 0178-27-7266
FAX 0178-27-7275
E-mail mori-m◎hachinohe-ct.ac.jp
(◎を@に変えてください)
学歴 平成11年3月 
名古屋工業大学工学部 機械工学科 卒業

平成13年3月 
名古屋工業大学大学院工学研究科 生産システム工学専攻 博士前期課程 修了

平成15年9月 
東北大学大学院工学研究科 機械電子工学専攻 博士後期課程 修了
専門分野

計算生体力学

研究課題

計算流体力学を応用した循環器系における流れ現象の解明

主要論文

Researchmapへ

Three-dimensional analysis of flow disturbances caused by clots in inferior vena cava filters (Rahbar, E., D. Mori, and J.E. Moore, Jr.) J Vasc Interv Radiol, 22(6): p. 835-42. 2011.

An internet-based wearable watch-over system for elderly and disabled utilizing EMG and accelerometer (M. Kishimoto, T. Yoshida, T. Hayasaka, D. Mori, Y. Imai, N. Matsuki, T. Ishikawa, T. Yamaguchi) Technology and Health Care, 17, 121-131. 2009.

Formation of saccular cerebral aneurysms may require proliferation of the arterial wall (Computational investigation) (Y. Shimogonya, T. Ishikawa, Y. Imai, D. Mori, N. Matsuki, T. Yamaguchi) Journal of Biomechanical Science and Engineering, 3, 431-442. 2008.

Computational study on effect of red blood cells on primary thrombus formation (Mori, D., Yano, K., Tsubota, K., Ishikawa, T., Wada, S., Yamaguchi, T.) Thromb Res, 123(1), pp. 114-121. 2008.

Simulation of platelet adhesion and aggregation regulated by fibrinogen and von Willebrand factor(Mori, D., Yano, K., Tsubota, K., Ishikawa, T., Wada, S., Yamaguchi, T.) Thromb Haemost, 99(1), pp. 108-115. 2008.

Analysis of Destruction Process of the Primary Thrombus Under the Influence of the Blood Flow (Yano, K., Mori, D., Tsubota, K., Ishikawa, T., Wada, S., Yamaguchi, T.) Journal of Biomechanical Science and Engineering, 2(1), pp. 34-44. 2007.

Stress distribution in a circular membrane with a central fixation (Mori, D., David, G., Humphrey, J. D., Moore, J. E., Jr.) J Biomech Eng, 127(3), pp. 549-553. 2005.

大動脈瘤の発症における大動脈内血流の影響の計算流体力学的解析 (森大祐,山口隆美) 日本脈管学会機関誌, 43(3), pp. 94-97 2003.

Modeling of the human aortic arch with its major branches for computational fluid dynamics simulation of the blood flow (Mori, D., T. Hayasaka, and T. Yamaguchi) JSME International Journal Series C-Mechanical Systems Machine Elements and Manufacturing, 45(4), pp. 997-1002. 2002.

口頭発表

新生児における大動脈縮窄症に対する手術適用指標の流体力学的評価について,菅原智哉,森大祐,計測自動制御学会東北支部第316回研究集会,資料番号316-10,2018.

川崎病によって幼児期に形成された冠動脈瘤残存が成人期の血行に及ぼす影響について,中村佑,森大祐,東北学生会第48回学生員卒業研究発表講演会論文集,pp.176~177,2018.

血管壁の流れに対する生物学的リモデリングを考慮した大動脈瘤形成シミュレーション,井畑貴悠紀,森大祐,東北学生会第46回学生員卒業研究発表講演会論文集,pp.194~195,2016.

臍帯内の螺旋状血管の血流に関する計算流体力学的解析,佐々木佳奈,レデゥアン,森大祐,東北学生会第45回学生員卒業研究発表講演会論文集,pp.193~194,2015.

捻転および巻絡が臍帯内の血流に及ぼす影響,荒尾明日人,森大祐,第23回バイオフロンティア講演会論文集,pp.11~12,2012.

数値解析的手法を用いたせん断流下における一次血栓形成に関する研究,中山啓, 森大祐,日本機械学会東北学生会第42回学生員卒業研究発表講演会論文集,pp.64~65,2012.

計算流体力学的手法を用いた大動脈弓部内の血流と壁せん断応力分布に関する研究,木附沢亮, 森大祐,日本機械学会東北学生会第42回学生員卒業研究発表講演会論文集,pp.140~141,2012.

COMPUTATIONAL MECHANICAL ANALYSIS OF PRIMARY THROMBUS FORMATION IN A BLOOD FLOW, Yano, K., Mori, D., Tsubota, K., Ishikawa, T., Wada, S., Yamaguchi, T., Fifth International Bio-Fluid Symposium and Workshop (Pasadena, California, USA), 2008.

Modeling of rectangular membranes used to subject cells to stress gradients, Mori, D., David, G., Humphrey, J.D., Moore, J.E., Jr., 5th World Congress of Biomechanics, (Munich, Germany), 2006.

著書等

Future Medical Engineering Based on Bionanotechnology Proceedings of the Final Symposium of the Tohoku University 21st Century Center of Excellence Program. pp.997~1006「COMPUTATIONAL FLUID DYNAMICS OF THE BLOOF FLOW IN THE THORACIC AORTA WITH RESPECT TO THE PATHOGENESIS OF THE AORTIC ANEURYSM」(Mori, D., T. Yamaguch), Imperical College Press, 2007.

Biomechanics at Micro- and Nanoscale Levels, Vol. IV, H. Wada, ed. pp.130~140「COMPUTATIONAL BIOMECHANICS OF BLOOD FLOW IN CARDIOVASCULAR DISEASES」(Yamaguchi, T., Ishikawa, T., Tsubota, K., Imai, Y., Mori, D., Matsuki, N.), World Scientific Pub Co Inc., 2007.

Encyclopedia of Biomedical Engineering, M. Akay, ed. pp.3694~3700「Vascular Mechanics」(Moore, J.E., Jr., Bedoya, J., Meyer, C., Moreno,M.R., Mori, D., Rhabar, E.), Wiley and Sons, New York, 2006.

Computational Fluid Dynamics 2002, Steve W. Armfield, Patrick Morgan, Karkenahalli Srinivas, ed., pp. 46-61, 「Towards Computational Biomechanics Based Cardiovascular Medical Practice」(T. Yamaguchi, T. Hayasaka, D. Mori, H. Hayashi, K. Yano, F. Mizuno, M. Harazawa) Computational Fluid Dynamics 2002, 2003.

Clinical Application of Computational Mechanics for the Cardiovascular System, T. Yamaguchi, ed., pp.132~135「3.3 Flow Simulation of the Aortic Arch -Effect of the 3D Distortion of Flows in the Ordinary Helix Circular Tube-」(Mori, D., H. Liu, and T. Yamaguch), Springer-Verlag, Tokyo, 2000.

Clinical Application of Computational Mechanics for the Cardiovascular System, T. Yamaguchi, ed., pp.269~272「4.7 The Modeling of the Heart and the Aortic Arch applying Differential Geometrical Method and Simulation of Blood Flow」(Mori, D., H. Liu, and T. Yamaguch), Springer-Verlag, Tokyo, 2000.

所属学会

日本機械学会
日本生体医工学会

外部資金

科学研究費補助金,基盤研究C,平成28年度~現在(研究代表者),(課題番号:16K10116) 「先天性心疾患の出生前診断を革新する計算生体力学による胎児・新生児循環予測の新開拓」

科学研究費補助金,若手研究B,平成25年度~平成27年度(研究代表者),(課題番号:25860923) 「臍帯血流予測シミュレーション技術とそれを用いた臨床胎児状態評価支援システムの開発」

科学研究費補助金,若手研究B,平成20年度~平成22年度(研究代表者),(課題番号:20700374) 「血漿タンパク分子の力学特性計測と計算流体力学による一次血栓形成過程に関する研究」

担当科目

本科 3年 材料力学ⅠA、材料力学ⅠB
4年 工学セミナー、エネルギー変換システム
5年 エネルギー変換機械、医工・福祉、コース実験II、卒業研究
専攻科 1年 工学研修、専攻実験、特別研究
2年 工学演習Ⅱ、特別研究

校務分担

5年生クラス担任
相談室運営委員会(副室長)
機械系親睦会
ナノテクノロジー系

クラブ顧問

バレーボール部 顧問

地域活動・ボランティア・役員等

日本機械学会東北支部学生会顧問(平成26年度~現在)

その他

青森県工業技術教育振興会賞(平成27年度)

前のページへ戻る